Cat6A RJ45 Jack with LED Through Hole Connector JU112143DLF1（Cross out Amphenol RJE49-188-1411）

Product Overview

This shielded Cat6A RJ45 jack provides an 8P8C interface without magnetics for designs using external transformer modules. The LCP UL94V-0 black housing and copper alloy shield maintain stable 500 MHz transmission, while green and yellow LEDs, gold plated contacts and a 1.25A current rating suit 10G switches, servers and enterprise ports.

Product Specifications

Product Features

• Cat6A 500 MHz Bandwidth: Channel performance tested to 500 MHz for 10GBASE-T network equipment.
• Dual LED Indication: Green and yellow LEDs report link and activity at the port itself.
• Gold Plated Contacts: Phosphor bronze pins carry 6 uin gold over nickel for stable low resistance.
• Shielded Construction: Copper alloy shield with 30 uin nickel plating controls EMI in dense racks.
• Wide Temperature Range: RJ45 Connector operates from -40 to +85 Degree C without derating.

Packing Details

Each JU112143DLF1 unit is packed in anti-static PE bags, seated in protective trays and boxed in standard export cartons. Bulk quantities ship on pallets with desiccant to protect the gold plated contacts and nickel plated shields during ocean and air transportation.

Applications

• 10G Switches: Access and aggregation ports running 10GBASE-T.
• Enterprise Servers: Server motherboards and storage controllers.
• Network Attached Storage: NAS units needing multi gigabit uplinks.
• Industrial PCs: Embedded computers in demanding environments.
• KVM and Video Extenders: Long reach transmission over Cat6A cabling.

Frequently Asked Questions (FAQ)

Q: What is the difference between Cat6A and Cat6 RJ45 jacks?

A: A Cat6A jack such as the JU112143DLF1 is verified to 500 MHz with crosstalk of 34 dB minimum, while Cat6 parts are typically specified to 250 MHz. The wider bandwidth supports 10GBASE-T transmission, and the shielded housing preserves that margin inside electrically noisy equipment.

Q: Can this LED equipped RJ45 jack without magnetics be used for PoE?

A: Yes, the connector contacts pass DC power, but PoE isolation and management must be provided by the external magnetics module in the circuit. Each contact is rated at 1.25A and 125VAC, so verify the power budget against the external transformer and system design before deployment.

Q: Which modular plugs mate with this connector?

A: The jack accepts 8P8C modular plugs conforming to the TIA-1096 standard, in both shielded and unshielded styles. For assembly, the recommended process is wave soldering with a peak temperature of 260 Degree C for 10 seconds, and the LED pads follow the suggested PCB layout on the drawing.