1G/5G Multi-Gig RJ45 Jack 2x6 Stacked Connector J26WF14A6DP01（Cross out PULSE J0B-5685ZNL-D）

Product Overview

This 1G/5G multi-gig RJ45 jack integrates twelve magnetics channels in one 2x6 stacked housing, pairing eight 1000Base-T ports with four 5GBASE-T ports and green yellow LEDs. Glass-filled polyester UL94V-0 construction, 30 uin gold plated contacts and 2250VDC isolation with 750 mating cycles suit multi-gig switches, wireless controllers and surveillance equipment.

Product Specifications

Product Features

• Twelve Port Density: Two stacked rows of six RJ45 ports consolidate twelve shielded connections in one footprint.
• Multi-Gig Ready: Four 5GBASE-T channels run beside eight 1000Base-T channels for smooth Gigabit to Multi-Gig upgrades.
• Integrated Magnetics: Built-in transformers with 1:1 turns ratio simplify PHY circuit layout.
• Dual Color LEDs: Green and yellow indicators report link and activity on both port rows.
• Rugged Construction: Glass-filled polyester UL94V-0 housing, 30 uin gold contacts and 750 mating cycles.

Packing Details

Each J26WF14A6DP01 unit is packed in anti-static PE bags and seated in protective trays, with 15 finished pieces per tray and a tray cover to keep every jack in place. Ten trays, 150 finished pieces in total, are boxed in one standard export carton. Bulk quantities ship on pallets with desiccant to protect the gold plated contacts and nickel plated shields during ocean and air transportation.

Applications

• Multi-Gig Switches: Eight Gigabit and four 5G ports in one footprint.
• Wireless LAN Controllers: Multi-gig uplinks for Wi-Fi 6 and 6E access points.
• Surveillance NVRs: Dense camera port banks with front panel LED status.
• Servers and Storage: Multi-gig NIC and management ports.
• Industrial Gateways: Rugged -40 to +85 Degree C operation.

Frequently Asked Questions (FAQ)

Q: What data rates do the 5G channels of this multi-gig RJ45 jack support?

A: The four 5GBASE-T channels are verified to 250 MHz with insertion loss of -0.5 dB maximum from 1 to 50 MHz and -1.5 dB maximum from 125 to 250 MHz. The remaining eight channels run 1000Base-T, so one component covers both Gigabit and Multi-Gig port requirements.

Q: How are the LED indicators wired on this 2x6 stacked RJ45 jack?

A: Four LED pairs serve the upper and lower port rows through pins 15 to 22. Green LEDs drop 2.2 V at 20 mA with a 565 nm dominant wavelength and yellow LEDs 2.1 V at 590 nm, so firmware can drive link and activity status for every port from a single shared pin group.

Q: What materials and plating are used on the contacts and shield?

A: Contacts are 0.35 mm flat phosphor bronze pins plated with 30 uin gold over nickel, while the 0.20 mm copper alloy shield is nickel plated and pre-soldered for PCB retention. Signal pins carry a 100 uin tin finish over nickel, and the housing uses glass-filled polyester rated UL94V-0.